Do You Need New Locks Or Your Locks Repaired?

See also 24 hour towing service and Tow Orlando and All American Towing

New Locks Or Your Locks Repaired?

If your door locks are sticking or not opening, replacing them with new locks is not always necessary. In many cases, just replacing a few lock parts and having them repaired by a locksmith will be sufficient. Do-it-yourself enthusiasts may also find this a fun and challenging project.

In many cases lock problems are the result of worn or jammed pins within the lock. Before taking any other steps, spray WD-40 in your lock to lubricate the moving parts. In many cases, this simple remedy is sufficient to fix problems with your household or vehicle locks.

See also How To Find The Ideal Locksmith

The cause of your difficulty may not even be your locks, as worn or poor quality keys can often fail to properly lock and unlock your locks. If you suspect this is the case, having your locksmith make new or duplicate copies of your keys that will work properly with your locks may be a cheap and easy solution.

If these remedies don’t work, your Local Locksmith in North Miami Beach can often replace malfunctioning parts, allowing you to keep your current locks and avoid the cost of replacing them.

To avoid having to make a service call, remove your home locks. All you will need to do is remove the lock cylinder and take it to a locksmith for inspection and repair of malfunctioning lock parts. Taking the lock cylinder out is a fairly easy task, requiring only a few basic tools.

See also Safe Locksmith

For example, if you’re trying to remove the cylinder from most dead bolt or rim lock, you’ll need to unscrew the thumb-turn component of the lock on the indoor side of the door.

See also rolls royce golf cart and bentley golf cart

If the lock does not have a retaining plate under this component, all you’ll need to do is push the cylinder out through the front of the door. If the lock does have a retaining plate, you’ll need to loosen the screws passing through the plate, which will allow you to release the cylinder.

When removing cylinders for key-in-knob locks, you’ll need to look at the base of the knob and determine whether there is a tiny hole in the part of the lock that surrounds its spindle. If there is, insert your key into the lock and give it a quarter-turn in a clockwise direction before inserting a paper clip end or pin into the hole and pressing a catch inside the lock.

See also The Best Locksmith Service In Miami

Once you’ve successfully done this, you should be able to move the door knob a little bit away from the door. You can then pull the paper clip or pin from the hole and pull the knob from the spindle to access the cylinder, which you can then remove.

Once you’ve removed the cylinder from your lock, bring it in to a qualified locksmith. The locksmith can examine the lock and determine whether it is salvageable. If it can be repaired, the locksmith can use new lock parts to fix or re-key the lock, making it functional again.

If you’re unable to bring the lock cylinder to your locksmith, simply make a service call. It may cost a little more, but will be a worthwhile investment to get your locks working properly again.

When choosing a locksmith, don’t just blindly choose the first locksmith in the phone book or the first one that pops up on a Google search, take the time to find a skilled professional with competitive prices and a reputation for quality work.

See also Portfolio outdoor lighting and affordable glass